TESTRON delivers high-quality environmental and climatic test chambers for various industries, such as automobile, aerospace, materials, electronics, military, paintings, battery, cable, pv solar panels, pharmaceuticals, navigation, and commodity industry.

The environmental test chamber is a testing chamber that can simulate various climatic conditions. A lot of manufacturers use these chambers to test their products before they launch them in the market. These tests help the manufacturers to anticipate problems in the real world and correct any defects in the products. By using test chambers manufacturers can lessen future costs of recalls or repair of deficient products.

Our environmental and climatic test chambers include:

1. Temperature Test Chamber


Temperature Humidity Test Chamber

TESTRON supplies a large range of standard and custom temperature and humidity test chambers to suit many types of environmental test conditions. Our climate and humidity test chambers are available in a variety of sizes and configurations, ranging in size from 50Ltier to 3000Liter.

Benchtop Temperature Humidity Test Chamber

Benchtop Temperature humidity Test Chambers are small, bench-top test chambers for simulating temperature and humidity environments. Include only temperature, temperature, and humidity test chambers.

Thermal Shock Test Chamber

2-Zone Thermal Shock Test Chamber: this thermal shock chamber consists of two chambers, one is a hot chamber and one is the cold chamber. Rapid sample elevator transfers between cold chamber to hot chamber to achieve temperature shock test. LIB thermal shock chambers are available in a variety of sizes and configurations to meet specific test requirements.

3TS Series Thermal Shock Test Chamber: this thermal shock test chamber has one chamber for the test room, it circulates cold and hot air through the pneumatic damper on the left and right sides. This design makes the external size smaller, and this 3TS series thermal shock chamber is pre-heated and pre-cooled to achieve faster test temperature.

Industry Dry Oven

Industry Dry Ovens are used for high-temperature drying, paint drying, drying glass and plastics, ink, and removing moisture, wood drying, and high-temperature tests. Applied to aerospace, automotive, electronics, metalworking

Industry Dry Oven at temperatures up to +250°C, +500°C, +800°C, +1000°C, +1200°C with small, medium and large volumes.

Drying ovens are available in various sizes and temperature ranges, including standard and custom ovens.

Cryogenic Chamber

Cryogenic Chamber uses a mechanical compressor to refrigerate to -120°C, replacing the traditional liquid nitrogen refrigeration method. It is mainly used in high-precision fields such as aerospace, military, electronic component testing, and high-end processing industry quenching processes.

2. Corrosion Test Chamber

Salt Spray Test Chamber

A salt spray test chamber is used to test the anti-corrosion quality of all the materials surfaces of painting, coating, electroplating in the condition of the salt spray environment. Basic salt spray test chambers meet ASTM, ISO, IEC, and other international standards test methods, capacity available in 108L, 320L, 410L, 780L, 1000L, and 1600L capacity.

Cyclic Corrosion Test Chamber

Cyclic corrosion test chamber exposes the sample to a series of different environments in repetitive cycles that incorporate temperature, humidity, salt spray, and dry. SC series corrosion chambers are upgraded to programmable controller and Ethernet access.

Salt Fog SO2 Spray Cyclic Corrosion Test Chamber

Salt Fog SO2 Spray Cyclic Corrosion Test Chamber add high concentration SO2 gas after salt spray and dry test to perform the high-intensity corrosion test.

3. Weathering Test Chamber

UV Weathering Resistance Test ChamberXenon Arc Accelerated Weathering Test Chamber

Xenon Accelerated Weathering Test Chamber

Xenon accelerated weathering test chamber reproduces weathering damage by sunlight, temperature, humidity and water spray. XL-S-750 xenon weathering chamber can place 42 pieces of specimens, are upgraded to programmable controller and Ethernet access.

UV Weathering Test Chamber

UV weathering test chamber is used in tests that incorporate UV light, temperature, condensing humidity, water sprays, and irradiance control.UV-SI-260 chamber is a very economical weathering tester and is widely used in material testing.

4. IP Test Chamber


Sand and Dust Test Chamber

Sand and dust test chamber are capable of simulating sand and dust environmental conditions in order to validate product seal. The airflow circulates upward from the bottom, blowing the dust circulation, forcing dust around the specimens. Available in a variety of sizes and configurations to meet specific test requirements.

IPX1 IPX2 IPX3 IPX4 Water Spray Test Chamber

The water spray test chamber can perform tests in accordance with IEC60529, and IPX1 X2 IPX3 IPX4 protection code. The chambers are built with the water-tightness of sealed components such as headlamps, Power connectors. A waterproof power connector in the test room can easily supply electricity to the specimens.

IPX5 IPX6 Water Jetting Test Chamber

IPX5 IPX6 water jetting test chamber is used for water jetting test of IPX5 X6 rate, which is applied to test the water tightness of enclosures of automotive parts, outdoor lamps, and electronics parts.

IPX7 IPX8 Water Immersion Test Equipment

IPX7 IPX8 water immersion test equipment is used for water immersion test of IPX7 X8 rate, simulate water depth pressure of 50 meters for immersion test.

IPX9K High-Pressure Water Spray Test Chamber

IPX9K high-pressure water spray test chamber is widely used in the electronics, military, and industries. IPX9K is the highest rating currently available for water ingress protection in accordance with IEC 60529 and ISO 20653. Products under test are subjected to high pressure (8000 –10000 Kpa), high temperature (+80°C), and water jets at a flow rate of 14 – 16 L/min.

Whole Set of Water Ingress IP Test Equipment

A whole set of water ingress IP test equipment -No housing type, IPX1 X2 X3 X4 X5 X6 X7 X8 whole set water ingress IP test equipment -No Housing Type. One complete system to perform IP dust and rain test, one-stop solution for IP test.

5. Special Test Chamber


Ozone Resistance Test Chamber

Ozone resistance test chamber is used for rubber aging test in conditions of temperature, humidity, and ozone exposure. An integral ozone air generating system ensures that the ozone gas is contained internally and precise control.

SO2 Noxious Gas Test Chamber

SO2 noxious gas test chambers reproduce damages by temperature, relative humidity, and noxious gas corrosion to material, components, and constructions.

This noxious gas chamber can be used for single gas tests and mixed gas tests. Test methods are in accordance with IEC 60068-2-42, IEC60068-2-60, and other standards.

Environmental Test Chamber for PV Solar Panels

Environmental test chamber for PV solar panels is for PV modules (solar panels) thermal cycling, humidity freeze cycle, and damp heat RH testing, to test whether PV modules can withstand high temperature with humidity and low temperature, to test its fatigue and thermal failure after temperature repeated changes, to confirm its thermal stress PV modules generated under high humidity circumstance and capability of long-term resistance to moisture penetration. This test chamber is widely used in solar panel testing.

6. Walk-in Chamber

Walk-In Chambers

Walk-in Chamber

 Walk-in test chambers are in piece assembling structures, which enables on-site installation and commissioning. With large volumes, the chamber can be used to simulate the single or complicated environmental factors in the atmosphere such as temperature, humidity, salt fog, illumination, dust, rain, and vibration. The products can be used to analyze and evaluate the property and performance of the batch elements and parts or machine sets under simulated conditions.

Contact our team to learn more about our machines and services [email protected]